Chinese new manufacturer ltmg 3ton diesel forklift for sale
The Specification of 3ton diesel forklift | |||
Manufacturer | CZPT | ||
Design | Electricity change T/M | FD30 | |
Load capacity | kg | 3000 | |
Load center | mm | 500 | |
Power unit | Diesel | ||
Operator type | Driver/seat | ||
Tire type | Pneumatic | ||
Wheel | Front/rear | two/2 | |
Max. lifting height | mm | 3000 | |
Cost-free lift | mm | one hundred fifty | |
Fork measurement | L*W*T | mm | 1070*125*45 |
Tilt range | Mast CZPT/backward | deg | six/12 |
Total duration(CZPT fork) | mm | 2705 | |
Overall width | mm | 1225 | |
Mast top (fork lowering) | mm | 2075 | |
Total height fork raised | With backrest | mm | 4250 |
Height to head guard | mm | 2140 | |
Turning radius(exterior) | mm | 2445 | |
Entrance encounter of fork to front axle | mm | 480 | |
Min. correct angle stacking aisle | CZPT load duration&clearance | mm | 2925 |
Speed | Max Travelling entire/no load | km/h | 18/19.5 |
Lifting total/no load | mm/s | 450/500 | |
Reducing full/no load | mm/s | 450/450 | |
Max.drawbar pull | Energy change T/M total/no load | kg | 1500/1000 |
Guide shift T/M total/no load | kg | 1550/a thousand | |
Gradeability at 1.6km/h | Power shift T/M complete/no load | % | eighteen/twenty |
Manual shift T/M entire/no load | % | eighteen/20 | |
Truck weight | kg | 4380 | |
Weight distribution | Full load entrance/rear | kg | 6490/890 |
No load front/rear | kg | 1670/2700 | |
Tires | Number | front/rear | two/2 |
Product | entrance axle | 28×9-15-12PR | |
rear axle | 6.50-ten-10PR | ||
Wheelbase | mm | 1700 | |
Tread | Front/rear | mm | a thousand/970 |
Floor clearance | At most affordable position (mast) | mm | 120 |
Body | mm | a hundred thirty five | |
Brake | Service brake | CZPT-foot pedal | |
Parking brake | Mechanical-hand lever | ||
Battery | Voltage/potential | V/AH | twelve/80 |
Engine | Product | CZPT C240 | |
Rated energy | kw/rpm | 34.3/2500 | |
Rated torque | N.m/rpm | 138/1800 | |
Number of cylinders | 4 | ||
Placement | L | 2.369 | |
Gasoline tank ability | L | 70 | |
Transmission | Velocity CZPT/backward | Energy change T/M | 1-1 electrical power change T/M |
Manual change T/M | two-two guide change T/M |
Item Characteristics
1.Risk-free :
LED work lights and warning lights make it safer and much more productive evenin bad lighting circumstances.
New developed overhead guard protective gadget avoid the unexpected mishaps.
Thicker reinforcing plate make sure the safety and efficiency.
2.Simple to work:
Linde-Technology single chain with reinforced load backrest–makes an superb and wider discipline of visionfor operator.
three.Lovely and relaxed:
New suspension adjustable seat makes the lengthy time running far more cozy.
Action spot is 1.five times larger with reduced phase height than fellow forklifts.
4.Resilient :
Sunken tilt cylinder below the floor create broader flat ground and significantly less abrasion.
Adjust plastic slider to alloy copper slider, reduce the abrasion and slim the hole between masts.
Thicker steering axle bridge deck.
5.Environmental:
Middle muffler, much more environmental.
6.Large technology:
Upkeep cost-free radiators adopt Germany technology.
CZPT Manufacturing unit
CZPT CZPTer
Packing & Shipping
After product sales support
CZPT constantly treat following-sale as essential as sale.
These days a lot more than fifty brokers all around the globe can supply CZPT specialist following-sale provider.
All the merchandise of CZPT equipped with 1 yr or 2000 doing work hours(which happens 1st)period high quality guarantee.
Depth clauses and procedures remember to verify our website and item certification.
FAQ
one.What is the Certificate do you have?
CZPT workshop fulfill with the CZPT:2008 High quality Technique. All of our items with CE certification. Some of our merchandise meets the EPA specifications.
2.Can you personalize and layout as the clients’ requirement?
CZPT will consider its best to fulfill all kinds of clients’ particular demands. Nonetheless, All the customizing and refit must be executed safely and securely and scientifically. The colours can be painted as client’s want.
three.How lengthy is the guarantee of your goods?
Normally one yr or 2000 doing work hrs whichever takes place very first. Particulars to see the CZPT warranty policy for each design.
four.Can you create the items labeled with the client’s model?
With the authorization of the manufacturer, we can OEM for our consumers.
five.What is actually the payment conditions do you take?
On T/T term 30% down payment is required in advance,and 70% stability shall be settled prior to cargo.
six.What logistics waysd we can operate for cargo ?
We can ship building equipment by numerous transportation tools.
1.For ninety% of our cargo,we will go by sea,to all main continents these kinds of as South The usa,Middle East,Africa,CZPTia and CZPTpe and so on,both by container or Bulk shipment.
two.For community nations of China,these kinds of as Russia,Mongolia, Kazakhstan,Uzbekistan and so on., we can ship vehicles by railway.
three.For gentle spare areas in urgent need,we can ship it by international courier support,this sort of as DHL,TNT,UPS,or Fedex.
seven.Supply time:
CZPT configuration goods are constantly in inventory. The creation period of time of CZPTizing merchandise is 30 times.
Welcome to contact us for even more inquiries!